How to Make USB Pen Drive Bootable?

I still remembered few months back, a friend of mine asked me to repair her Windows. The problem was her CD-ROM was not functioning. Therefore, I couldn’t boot from the Windows XP bootable CD. I did think about copying the file from the XP cd to my pen drive and boot from my USB pen drive. But how can I booted from my USB pen drive when the pen drive itself was not bootable? That’s a few months old story.

If today my friend comes again to me with the same problem, I will be happy to help because now I know how to make USB pen drive bootable. MakeBootable is a freeware application that turns your USB pen drives into a bootable media with just a single click. This nifty utility makes your pen drive to be bootable without erasing any data in the USB device.





MakeBootable consists of a single executable file and requires no installation. To use MakeBootable, run the MakeBootable executable file. On the main window, select the USB device you wish to make bootable. Click on the “Make Bootable” button to begin the process. The program will load several files required for boot up into your device.

Next, you need to change the boot-up setting in the system BIOS. With your USB device still plugged, restart your system. Enter the BIOS setup menu and change the boot device setting. Select USB Device as First Boot device in the boot device priority. If the boot-up files are created in the USB drive, select USB-HDD or USB-ZIP (preferred). If the boot-up files are created in the floppy drive of your device, select USB-FDD (for pen drive that supports security mode).

Once done, save and exit the BIOS setup. Now, you should be able to boot up with your USB device.

MakeBootable run perfectly on Windows 98, ME, 2000 and XP.

Note : Before running MakeBootable, if your USB pen drive is under FAT32 and NTFS file system format, you need to convert the format to FAT. MakeBootable does not support FAT32 and NTFS file systems.

YOU CAN DOWNLOAD MAKE BOOTABLE FROM WWW.GOOGLE.COM.........
THNX....

I still remembered few months back, a friend of mine asked me to repair her Windows. The problem was her CD-ROM was not functioning. Therefore, I couldn’t boot from the Windows XP bootable CD. I did think about copying the file from the XP cd to my pen drive and boot from my USB pen drive. But how can I booted from my USB pen drive when the pen drive itself was not bootable? That’s a few months old story.

If today my friend comes again to me with the same problem, I will be happy to help because now I know how to make USB pen drive bootable. MakeBootable is a freeware application that turns your USB pen drives into a bootable media with just a single click. This nifty utility makes your pen drive to be bootable without erasing any data in the USB device.





MakeBootable consists of a single executable file and requires no installation. To use MakeBootable, run the MakeBootable executable file. On the main window, select the USB device you wish to make bootable. Click on the “Make Bootable” button to begin the process. The program will load several files required for boot up into your device.

Next, you need to change the boot-up setting in the system BIOS. With your USB device still plugged, restart your system. Enter the BIOS setup menu and change the boot device setting. Select USB Device as First Boot device in the boot device priority. If the boot-up files are created in the USB drive, select USB-HDD or USB-ZIP (preferred). If the boot-up files are created in the floppy drive of your device, select USB-FDD (for pen drive that supports security mode).

Once done, save and exit the BIOS setup. Now, you should be able to boot up with your USB device.

MakeBootable run perfectly on Windows 98, ME, 2000 and XP.

Note : Before running MakeBootable, if your USB pen drive is under FAT32 and NTFS file system format, you need to convert the format to FAT. MakeBootable does not support FAT32 and NTFS file systems.

YOU CAN DOWNLOAD MAKE BOOTABLE FROM WWW.GOOGLE.COM.........
THNX....

Game Secrets

Game Secrets
Solitaire: Instant Win
Press Alt + Shift + 2 to instantly win


Solitaire: Draw only 1 card (instead of 3)
Hold down Ctrl + Alt + Shift then click on unopen cards to draw.


FreeCell: Instant Win
Hold down Ctrl + Shift + F10 while playing, then click Abort.
Now move one card.


FreeCell: Hidden Game Modes
Go to "Game" menu choose "Select Game"
Here you can choose from game mode 1 to 1,000,000. But -1 and -2 will also work (hidden modes)


Hearts: Show All Card
Warning! this requires a modification on your registry. Be sure you follow the steps carefully. Damage your registry might damage your Windows.
Open the "Registry Editor" by: "Start" >> "Run" then type "regedit" and press Enter
Expand to HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Applets\Hearts
Right-click on the right panel and create a new String value with the name "ZB"
Double-click to open this key "ZB" to edit its value. Then enter "42" and close the Registry Editor.
Start Hearts and Press Ctrl + Alt + Shift + F12 to show all the cards


Minesweeper: Stop The Timer
When you start to play a new game, the timer is ticking...
Press Windows Key + D to show desktop.
Now come back to the game by selecting it from the taskbar. The timer is stopped.


Pinball
Unlimited Balls: Type bmax at a new game to get unlimited balls (no notification).
Extra Balls: Type 1max at a new game to get extra balls.
Gravity Well: Type gmax at a new game to activate Gravity Well.
Promotion: Type rmax at a new game or while playing to get instant promotion and raising rank.
Extra points with partial shots: Partially shot the ball just to pass the yellow light bars. There are 6 bars. With the first bar, you'll get 15,000 points, 2nd: 30,000,...
Extra points with partial shots: Partially shot the ball just to pass the yellow light bars. There are 6 bars. With the first bar, you'll get 15,000 points, 2nd: 30,000,...
Test Mode: Type hidden test with a new ball or new game. Now you can use your mouse to drag and move the ball where you want.

Increase your RAM by Increasing system speed

1). Start any application, say Word. Open some large documents.



2). Press CTRL+SHIFT+ESC to open Windows Task Manager and click Processes tab and sort the list in descending order on Mem Usage. You will notice that WINWORD.EXE will be somewhere at the top, using multiple MBs of memory.
3). Now switch to Word and simply minimize it. (Don’t use the Minimize All Windows option of the task bar).
4). Now go back to the Windows Task Manager and see where WINWORD.EXE is listed. Most probably you will not find it at the top. You will typically have to scroll to the bottom of the list to find Word. Now check out the amount of RAM it is using. Surprised? The memory utilization has reduced by a huge amount.
5). Minimize each application that you are currently not working on by clicking on the Minimize button & you can increase the amount of available RAM by a substantial margin. Depending upon the number and type of applications you use together, the difference can be as much as 50 percent of extra RAM.
In any multitasking system, minimizing an application means that it won’t be utilized by the user right now. Therefore, the OS automatically makes the application use virtual memory & keeps bare minimum amounts of the code in physical RAM.

How To: Post A Status Longer Than 420 characters

Has your status ever been too complicated to describe in less than 420 characters? The maximum length of a status update on Facebook is currently 420 characters. If you exceed that number you will get this annoying error message:

“Status updates must be less than 420 characters. You have entered 804 characters here. Notes can be much longer. Would you like to edit and post your update as a Note instead?”


Sometimes you may have a lot to say but you don’t want to post it in a note.

How it works:

All you have to do is “Upload a Photo” instead of sharing a status.





Step 1: Simply grab a photo off your hard drive, any photo you want to accompany your extremely long status update.

Step 2: Once you select your photo, you can write as much as you want! Part of your message will be covered up by a “See More” link, but its better than nothing.





Step 3: Click Share!

If you found this loophole useful, like this post and share it with your friends!

Fix Corrupt Files In Windows XP and Windows 7

Hello friends, these tips is for all those who have windows XP and windows 7 and those wants to fix their corrupted files in windows XP and in windows 7. My computer also had been suffered from this kind of problem and I maintained it through the help of following tips. Well this is a good and full proof way to fix corrupt file.

Process:

In Windows XP

1. At first you need have a XP CD to solve this problem.

2. Now, place or put that CD in your CD or DVD drive.

3. Go to Start button.

4. Go to Run

5. And in the Run command type “SFC / SCANNOW“.

6. This process should fix your corrupt.

7. Now, boot from your windows XP CD, then ignore the first repair option you get by pressing the R and when it shows you windows XP is already installed then you will see Repair option, select it and just start and repair it. it won’t affect any of installed software from your system.

Note: You could also attempt a defragment of your hard drive, as fragmentations of files can sometimes produce errors.

In windows 7

This tricks is as same as a process of windows XP. Here it is.

1. At first, go and turn on your system means your computer.

2. Then before open your windows, login as Administrator.

3. Click start and go to All programs.

4. Go to Accessories.

5. After that right click on command prompt and select “Run as Administrator“.

6. Now, just type “SFC/SCANNOW” in the command prompt and hit or press the enter button.





7. Now, it will take several minutes to scan for damaged systems files and verifies its integrity

8. Don’t panic. Wait till the process of scanning is 100% or fully complete.




9. After the process finished, close out the command prompt window and reboot your system.

Note: Both process are seems same, but there is some different uses of command so, be careful while doing it and use the command correctly.

how can i solve problem of double-click on any folder in Computer,

Whenever ppl double-click on any folder in Computer,

it opens in a new window even if selected the option “Always open folders in same window” in “Tools -> Folder Options”.
For this kind of Problem

Download following zip file, extract it and then run .REG file and confirm the action:

http://media.askvg.com/downloads/2007/10/Add%20Take%20Ownership%20Option.zip
copy this link and paste your in web browser