Hey peeps now u can listen to wats there in a pdf document instead of reading the whole document....
Try out the following key
combinations for Acrobat 6.0 & 7.0:
- ctrl+ shift + b ---> To hear the whole document
ctrl + shift + v ---> To hear only the page
ctrl + shift + c ---> To resume
ctrl + shift + e ---> To stop
Saturday, July 9, 2011
Friday, July 8, 2011
Youtube Tricks
1. View youtube video in High Quality:-
You have to check whether your searched video can be viewed with high quality, you have to write some codes after the url.
“&fmt=6” (mono320×240, Flash 7 video @ 900Kbps, audio @ 44.1KHz 96Kbps)
“&fmt=18” (stereo, 480 x 360 resolution, H.264 video @ 512Kbps; audio @ 44.1KHz 128Kbps Stereo).
“&fmt=22” (stereo, 1280 x 720 resolution, (720p), H.264 video @ 1024Kbps; audio @ 44.1KHz 232Kbps Stereo).
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=6
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=18
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=22
2. Embed youtube video in High Quality:-
If you want to embed a high quality video, then you have to use the following codes after the url and then embed it.
“&ap=%2526fmt%3D18″ or,
“&ap=%2526fmt%3D22″
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&ap=%2526fmt%3D22
3. View the vital part of the video:-
If the vital part or the required action starts after some time of the video, then you have to append the codes given to start the video at that point of time.
#t=MMmSSs where MM is minutes and SS is seconds.
For example, http://www.youtube.com/watch?v=myYEoG5kVT0#t=01m45s
4. Embed the vital part of the video:-
To embed the vital part of the video, just type the following code after the url before embedding.
‘&start=20′ to skip first 20s of the video.
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&start=20
5. View In Full Screen Mode:-
If you want to view your video in full screen mode on your web browser, then just replace your video id.
By Default, http://www.youtube.com/watch?v=VIDEO ID
For example, http://www.youtube.com/watch?v=myYEoG5kVT0
Note:- Video ID is the 11 digit alphanumeric code in the url. For example, “myYEoG5kVT0” is the video ID of the above youtube url.
6. Hide the Search Box:-
To hide the search box, just append ‘&showsearch=0′ after the url and then embed it.
7. Autoplay and Loop an embedded video
For autoplaying the video, you must embed the link after appending the url with ‘&autoplay=1’.
http://www.youtube.com/watch?v=myYEoG5kVT0&autoplay=1
And for looping your video, you must append ‘&loop=1’ which will loop the video after it ends.
http://www.youtube.com/watch?v=myYEoG5kVT0&loop=1
8. Embed clickable link in your youtube video
Only non-profiting organizations or channels can put any clickable link in any youtube video. But if you want to do that, you must go through some trick.
Before embedding your video to your blog or web page, visit the site http://www.linkedtube.com/ or http://www.overlay.tv/. Then add the video link you want to embed. Add the clickable link and copy the code and embed it. Then the clickable link can be clicked from your video.
9. Download youtube video
If you want to download any youtube video, there are various ways to download it. Many websites downloads youtube video for you.
To Download HD video: visit www.keephd.com
To download normal video : visit www.keepvid.com
There you have to paste the youtube link you want to download. Then click on the download icon.
Otherwise, you can add the prefixes like “kick” or “kiss” to the youtube video you want to download. For example, www.kickyoutube.com or www.kissyoutube.com.
If you want to download only the MP3 from the youtube video, then go to the site, www.listentoyoutube.com.
No related posts.
You have to check whether your searched video can be viewed with high quality, you have to write some codes after the url.
“&fmt=6” (mono320×240, Flash 7 video @ 900Kbps, audio @ 44.1KHz 96Kbps)
“&fmt=18” (stereo, 480 x 360 resolution, H.264 video @ 512Kbps; audio @ 44.1KHz 128Kbps Stereo).
“&fmt=22” (stereo, 1280 x 720 resolution, (720p), H.264 video @ 1024Kbps; audio @ 44.1KHz 232Kbps Stereo).
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=6
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=18
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&fmt=22
2. Embed youtube video in High Quality:-
If you want to embed a high quality video, then you have to use the following codes after the url and then embed it.
“&ap=%2526fmt%3D18″ or,
“&ap=%2526fmt%3D22″
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&ap=%2526fmt%3D22
3. View the vital part of the video:-
If the vital part or the required action starts after some time of the video, then you have to append the codes given to start the video at that point of time.
#t=MMmSSs where MM is minutes and SS is seconds.
For example, http://www.youtube.com/watch?v=myYEoG5kVT0#t=01m45s
4. Embed the vital part of the video:-
To embed the vital part of the video, just type the following code after the url before embedding.
‘&start=20′ to skip first 20s of the video.
For example, http://www.youtube.com/watch?v=myYEoG5kVT0&start=20
5. View In Full Screen Mode:-
If you want to view your video in full screen mode on your web browser, then just replace your video id.
By Default, http://www.youtube.com/watch?v=VIDEO ID
For example, http://www.youtube.com/watch?v=myYEoG5kVT0
Note:- Video ID is the 11 digit alphanumeric code in the url. For example, “myYEoG5kVT0” is the video ID of the above youtube url.
6. Hide the Search Box:-
To hide the search box, just append ‘&showsearch=0′ after the url and then embed it.
7. Autoplay and Loop an embedded video
For autoplaying the video, you must embed the link after appending the url with ‘&autoplay=1’.
http://www.youtube.com/watch?v=myYEoG5kVT0&autoplay=1
And for looping your video, you must append ‘&loop=1’ which will loop the video after it ends.
http://www.youtube.com/watch?v=myYEoG5kVT0&loop=1
8. Embed clickable link in your youtube video
Only non-profiting organizations or channels can put any clickable link in any youtube video. But if you want to do that, you must go through some trick.
Before embedding your video to your blog or web page, visit the site http://www.linkedtube.com/ or http://www.overlay.tv/. Then add the video link you want to embed. Add the clickable link and copy the code and embed it. Then the clickable link can be clicked from your video.
9. Download youtube video
If you want to download any youtube video, there are various ways to download it. Many websites downloads youtube video for you.
To Download HD video: visit www.keephd.com
To download normal video : visit www.keepvid.com
There you have to paste the youtube link you want to download. Then click on the download icon.
Otherwise, you can add the prefixes like “kick” or “kiss” to the youtube video you want to download. For example, www.kickyoutube.com or www.kissyoutube.com.
If you want to download only the MP3 from the youtube video, then go to the site, www.listentoyoutube.com.
No related posts.
Tuesday, July 5, 2011
How to apply animation on text or objects in Power Point 2010?
It is very easy to apply animation on text or object in Microsoft Power Point 2010. Animations are applied to emphasize certain things, other objective is to avoid boredom of audience and keep their interest intact through whole presentation. It also helps you to control flow of information, for example if you are explaining a certain point and you do not want your audience to get distract by next points then by help of animation you can stop next points.
You can apply animation on not only text but also on shapes, tables, pictures and other object. The visual effects that are included in Power Point 2010 are exits, entrance, changes in Font Sizes and Colours. You have the option to apply one or multiple animation on one object. Both methods are described below.
Four types of animation effects are available in PowerPoint 2010.
Entrance
Exits
Emphasis
Motion Paths
Applying Single Animation
Instructions:
1. Open your desired Power Point Presentation, to which you want to apply animation.
2. Highlight / Select the text or object you wish to animate'
3. Click on the Animation tab, from “Animation” Group, apply your desired animation.
4. To see more Animation Styles, click Red Highlighted Button
And you will see a range of different animation listed under the categories mentioned above that is Entrance, Exit, Emphasis and Motion Paths. To access detailed animation choose “More” options, as shown in the bottom of the picture.
Applying Multiple Animation to a Text or Object
If you wish to apply “Multiple” animation that is more than one, to a single text then perform steps listed below.
Instructions:
1. Click on the animation tab
2. Under the “Advanced Animation” Group, click on More Animation. A list of Animations will be opened; you can apply your desired one.
You can apply animation on not only text but also on shapes, tables, pictures and other object. The visual effects that are included in Power Point 2010 are exits, entrance, changes in Font Sizes and Colours. You have the option to apply one or multiple animation on one object. Both methods are described below.
Four types of animation effects are available in PowerPoint 2010.
Entrance
Exits
Emphasis
Motion Paths
Applying Single Animation
Instructions:
1. Open your desired Power Point Presentation, to which you want to apply animation.
2. Highlight / Select the text or object you wish to animate'
3. Click on the Animation tab, from “Animation” Group, apply your desired animation.
4. To see more Animation Styles, click Red Highlighted Button
And you will see a range of different animation listed under the categories mentioned above that is Entrance, Exit, Emphasis and Motion Paths. To access detailed animation choose “More” options, as shown in the bottom of the picture.
Applying Multiple Animation to a Text or Object
If you wish to apply “Multiple” animation that is more than one, to a single text then perform steps listed below.
Instructions:
1. Click on the animation tab
2. Under the “Advanced Animation” Group, click on More Animation. A list of Animations will be opened; you can apply your desired one.
Trick For How To Hide Your Profile On Facebook
Is It really Possible to Hide Profile from facebook search?
Yes,you can hide your facebook profile from facebook search.Basically facebook provides you with three options as follows:-
1. Everyone can search your profile on facebook
2. Only Your friends and friends of friends can search your profile
3. Only your friends can search your profile
For those who are really frustrated by daily unwanted friends request should select either 2 or 3 option.
Here is the complete step by step tutorial with screenshots on How To Hide Your Profile On Facebook
1. Login into your facebook account.
2. Click on Account on top right side.
3. Now Click on Privacy and then on View Settings Under Connecting on Facebook heading
4. Now you will see a lot of privacy settings and the first one being Search for you on Facebook
5. In front of Search for you on Facebook you can select any one of the three options from the drop-down box as per your need.
Yes,you can hide your facebook profile from facebook search.Basically facebook provides you with three options as follows:-
1. Everyone can search your profile on facebook
2. Only Your friends and friends of friends can search your profile
3. Only your friends can search your profile
For those who are really frustrated by daily unwanted friends request should select either 2 or 3 option.
Here is the complete step by step tutorial with screenshots on How To Hide Your Profile On Facebook
1. Login into your facebook account.
2. Click on Account on top right side.
3. Now Click on Privacy and then on View Settings Under Connecting on Facebook heading
4. Now you will see a lot of privacy settings and the first one being Search for you on Facebook
5. In front of Search for you on Facebook you can select any one of the three options from the drop-down box as per your need.
Monday, July 4, 2011
How to add background picture to Excel 2007 spreadsheet?
You can insert a picture in Word, PowerPoint or Excel 2007 very easily. Many people know how to insert a picture in Excel 2007 spreadsheet but they don’t know how to add background picture to Excel 2007 spreadsheet. Excel 2007 spreadsheets largely consist of numbers, charts, tables etc. You can give your personal creative touch to your work on Excel 2007 if you add background picture to Excel 2007 spreadsheet. After you add background picture to Excel 2007 spreadsheet, you will be able to make it look less boring and much more interesting. Follow these easy and simple steps to add background picture to Excel 2007 spreadsheet.
Open the Excel spreadsheet to which you would like to add the background picture.
Select Page Layout from the ribbon.
Click on Background.
The Sheet Background window pane will appear. Choose the graphics or image you want to add as the background.
Click on Insert at the bottom.
You have successfully added a background image to your Excel 2007 spreadsheet! You can change the colors as well as the font to suit the background picture. It is recommended that you select a very light or a very dark colored picture so that the data on the foreground stands out.
Open the Excel spreadsheet to which you would like to add the background picture.
Select Page Layout from the ribbon.
Click on Background.
The Sheet Background window pane will appear. Choose the graphics or image you want to add as the background.
Click on Insert at the bottom.
You have successfully added a background image to your Excel 2007 spreadsheet! You can change the colors as well as the font to suit the background picture. It is recommended that you select a very light or a very dark colored picture so that the data on the foreground stands out.
Sunday, July 3, 2011
Trick To Block Any Website On Your Computer
Here is the Trick To Block Any Website On Your Computer
Open My Computer/Computer
Navigate to your Operating system drive (Usually C drive)
Now goto Windows –>System32–>drivers–>etc
Here you will see your Hosts file.Open this file with notepad.
Now move to the last line in this file and add the address of the website to be blocked prefixed by 127.0.0.1
For example In the screenshot below I have blocked google-analytics.com on my computer
Remember that you should insert the Url of the blocked website with and without www prefix as shown in the above screenshot
Now Save the file.
Open My Computer/Computer
Navigate to your Operating system drive (Usually C drive)
Now goto Windows –>System32–>drivers–>etc
Here you will see your Hosts file.Open this file with notepad.
Now move to the last line in this file and add the address of the website to be blocked prefixed by 127.0.0.1
For example In the screenshot below I have blocked google-analytics.com on my computer
Remember that you should insert the Url of the blocked website with and without www prefix as shown in the above screenshot
Now Save the file.
Friday, July 1, 2011
facebook sileys shortcut
smile :-) :) :] =)
frown :-( :( :[ =(
gasp :-O :O :-o :o
grin :-D :D =D
tongue :-P :P :-p :p =P
wink ;-) ;)
curly lips :3
kiss :-* :*
grumpy >:( >:-(
glasses 8-) 8) B-) B)
sunglasses 8-| 8| B-| B|
upset >:O >:-O >:o >:-o
confused o.O O.o
shark (^^^)
pacman :v
squint -_-
angel O:) O:-)
devil 3:) 3:-)
unsure :/ :-/ :\ :-\
cry :'(
Chris Putnam :putnam:
robot :|]
heart <3
kiki ^_^
42 :42:
penguin <(“)
frown :-( :( :[ =(
gasp :-O :O :-o :o
grin :-D :D =D
tongue :-P :P :-p :p =P
wink ;-) ;)
curly lips :3
kiss :-* :*
grumpy >:( >:-(
glasses 8-) 8) B-) B)
sunglasses 8-| 8| B-| B|
upset >:O >:-O >:o >:-o
confused o.O O.o
shark (^^^)
pacman :v
squint -_-
angel O:) O:-)
devil 3:) 3:-)
unsure :/ :-/ :\ :-\
cry :'(
Chris Putnam :putnam:
robot :|]
heart <3
kiki ^_^
42 :42:
penguin <(“)
Subscribe to:
Posts (Atom)